Description

All Set? It is Time
to Harvest!

Being a farmer is tough work,
especially when you are out in the fields. Every inch of the ground needs to
be covered at the time of harvest, so the farmer can maximize profits. A
Combine comes in very handy during this time the Harvester from UGEARS is
designed to give you a realistic taste of farm life at home.

• To resemble its real
  life counterpart, the reel of the Harvester starts spinning when the Combine
  is moving forward. Check it out you will be fascinated with the detailing.
• The rubber band
  engine can be wound up easily just drag the model backwards or spin the
  large back wheel.
• Want to stop the
  vehicle? Pull the convenient handbrake lever on the other side of the cabin
  that can be used to halt the motion and lock it in place. If you wish to
  partake in an improvised drag race, release the lever, sit back, and watch!
• The best feature is
  the built-in secret box that can be opened using a lever situated to the
  left of the drivers cabin. Isnt it a wonderful way to send romantic
  messages to that special someone?
• Plywood parts
  manufactured using an advanced laser cut procedure, makes them resistant to
  rust, so you can safely display them without worrying about corrosive
  deposits accumulating on the surface.

The model kit is an excellent gift for a
wide age group all they need is a passion for creating things from scratch.
Being associated with the UGEARs brand, you can rest assured the product is of
premium quality and will last for a long time. This model has been tweaked
quite a few times to create an ideal version of this exquisite gadget.
Moreover, you dont have to deal with irritating, sticky fingers as the parts
are designed for self-assembly sans any kind of glue this characteristic is
what makes our patented inventions even more special.

So what are you waiting for? Please
order immediately.

Model Size: 5.3*6.5*11 in (135*165*278mm)
Package size: 14.6*6.7*1.2 in (37*17*3cm)
Number of parts: 154

Models assembly tips

• If you hold the
  board with its front side directed to you, it is better to remove the
  parts by pulling them. In this case, if a burr is pulled together with a
  part, it will make a pit in the board, not in the part. The best
  solution is to incise the hangers with a knife;
• If you have
  difficulties in inserting a toothpick in the assembled gearwheel, rub
  the toothpick with a candle;
• You may also
  lubricate all the projecting axes of the gearwheels before installing
  them on the frame. In this case the friction during rotation will be
  minimal;
• However, do not
  lubricate the parts of pendulum connection with a candle two
  projecting sticks in the tractor or timer. In this case the pendulum
  will not swing but skid;
• Try to remove
  big burrs on the gearwheels, if any. The motion of some models is very
  delicate, and they may hinder it;
• If any
  gearwheel creaks or squeaks, lubricate it with a regular candle,
  paraffin or wax. If the plywood edge is too resinous and some teeth tend
  to seize, which happens quite rarely, lubricate the gearwheel in the
  same manner;